Adhesive

Stain Type: Adhesive or Tape residue:

TOOLS REQUIRED: Hot water extraction machine.
CHEMICALS REQUIRED: Pro Solve Gel and Power Gel.

Procedure:

  1. Wet contaminated fibers with Pro Solve Gel.
  2. Agitate gently but thoroughly to dissolve contamination.
  3. Allow dwell time.
  4. Apply Power Gel to contaminated fibers.
  5. Again agitate gently but thoroughly.
  6. Very thoroughly rinse clean using hot water extraction.
  7. Leave as dry as possible.
[Adhesive]

For Technical Support please call us at (800) 368-1247 or drop us an e-mail.

Join Our Email List
Email: